Traffic Engineering

Stop Signs

Stop Sign Installation Policy

Stop Sign Installation Policy (PDF Format)

Multi-way Stops

A stop sign is one of our most valuable and effective control devices when used at the right place and under the right conditions. It is intended to help drivers and pedestrians at an intersection decide who has the right-of-way.

One common misuse of stop signs is to arbitrarily interrupt through traffic, either by causing it to stop, or by causing such an inconvenience as to force the traffic to use other routes. Where stop signs are installed as "nuisances" or "speed breakers," there is a high incidence of intentional violation. In those locations where vehicles do stop, and frequently speeds are actually higher between intersections. For these reasons, it should not be used as a speed control device.

A school crossing may look dangerous for children to use, causing parents to demand a stop sign to halt traffic. Now a vehicle which had been a problem for 3 seconds while approaching and passing the intersection becomes a problem for a much longer period. A situation of indecision is created as to when to cross as a pedestrian or when to start as a motorist. Normal gaps in traffic through which crossings could be made safely no longer exist. An intersection which previously was not busy now looks like a major intersection. It really isn't - it just looks like it. It doesn't even look safer and it usually isn't.

Most drivers are reasonable and prudent with no intention of maliciously violating traffic regulations; however, when an unreasonable restriction is imposed, it may result in flagrant violations. In such cases, the stop sign can create a false sense of security in a pedestrian and an attitude of contempt in a motorist. These two attitudes can and often do conflict with tragic results.

Well-developed, nationally recognized guidelines help to indicate when such control become necessary. These guidelines take into consideration, among other thins, the probability of vehicles arriving at an intersection at the same time, the length of time traffic must wait to enter, and the availability of safe crossing opportunities.


ABOUT US

Annual Reports
-
Signs & Markings Annual Report
-
Transportation Safety Report

Counts
-
Traffic Counts

Frequent Questions
-
What are those Cameras at the intersections?
-
How do I report a missing Traffic Sign?
-
How do I report a malfunctioning Signal?
-
How do I request a Speed Hump?
-
How do I request a Speed Monitoring Trailer?
- How do I request a Speed Display Sign?
-
How do I report a Street Light Outage?

Bicycling
-
Bicycle System Master Plan

Parking
-
Parking on City Streets

Schools
-
School Safety Brochure

Pedestrian Safety
-
Pedestrian Safety

Signals
-
Lakewood's Traffic Signal Standards

Signs & Markings
-
City's Stop Sign Policy
- Pavement Markings
-
Signs and Markings

Traffic Calming
-
Children Playing Signs
-
Lowering Speed Limits
-
Roundabouts

Traffic Control Plans
-
Traffic Control Plans

Transportation Links
-
Car Pool Information
- CDOT - USDOT
-
Denver International Airport
-
RTD: "The Ride"
-
Road Information